We produce rubber flooring and matting for a variety of uses. From agricultural buildings and Lorry Linings to acoustic matting and Roof Balcony protective tiling.
Suitable under :-
- Ceramic tile
- Sheet Vinyl
- Stone Floors
- Laminate
- Wood
- Parquet
- Carpet
- Flotex
- Marble Floors
- Eco Friendly
Acoustic Cradle - Level-IT
The Level-It Floor Cradle System was developed in order that a level finish could be achieved on uneven floors or cambered sub-floors. The system is Document E Compliant and will help achieve impact noise and airborne noise sound requirements as laid down in document E of the building regulations.
Services
Services can be run within the flooring system. An access cover is available for easy access to services.
Insulation
Insulation can be laid within the floor void.
Adjustability
Easy adjusting. The cradle can be leveled to within 1mm per each quarter turn.
Perimeter Detail
It is good construction practice to use a perimeter batten to all walls.
Compliant, Quick, Efficient
- Document E Compliant
- No packers required - self adjusting
- Can provide impact insulation with a mass greater than 300kg/M2
- Provides a level finished floor on uneven sub-floor, eliminating costly remedial work.
- Quick to install
- Services can be put into cavity
- Allows for application of a variety of floor surfaces i.e. chipboard, plywood, wood plank etc
- Total floor depth of system can be a minimum of 50mm Batten up to 200mm
- Dry construction means no drying out procedures / delays
Technical Information
| Types of Base | Levelling base are manufactured from injection moulded High Grade polymer, size 100mm circular |
| Types of Joist | Softwood straight grained 45mm upwards, finished thickness x 45mm width, preferably length 1800mm. Moisture content should not exceed 14%. Preservative treatment can be specified but is not usually considered necessary. |
| Board Flooring | For domestic use, 18mm C4 T&G chipboard with batten spacing of 450mm is recommended for Boarding such as 22mm chipboard, plywood or hardwood strips can also be used with appropriate batten centers recommended by the floor-board manufacturers. Closer batten spacing may be necessary for areas with higher loading i.e. commercial developments, such as office spaces. |
| For Non- residential Use | Please contact our technical line for batten spacing for higher loadings. |